Product Detail

Foam cutting machine Hot Cut 60

999,00PLN with VAT

Hot-Cut 60 New!

This is a new styrofoam cutting machine in the Hot-Cut family. HC-60 copes well with cutting the whole polystyrene block without the need to separate individual boards.

Features:

  • maximum cutting length: 113 cm
  • maximum cutting thickness: 60 cm
  • power supply: 250W 230/24V 8A
  • wire: 0.7 mm
SKU: 1415 Category:

Hot-Cut Guillotine, Foam cutting machine, polystyrene cutter

Hot-Cut 60 New!

This is a new foam cutting machine in the Hot-Cut family. Dedicated specifically where you need to optimize the process through cutting speed and repeatability. The new HC-60 guillotine copes perfectly with cutting the entire styrofoam block without the need to separate individual boards. Cutting width 113 cm, cutting height 60 cm.

Features:

  • high cutting precision
  • fully metal, very durable construction
  • extensive possibilities of adjusting cutting parameters
  • wide range of accessories
  • simple assembly / disassembly of the device and accessories
  • minimizing the amount of waste generated during cutting (including small, difficult to collect polystyrene balls formed during traditional cutting with a knife or saw)
  • reduction of cleaning costs
  • reduction of thermal bridges
  • less use of polystyrene
  • easy to use

The main purpose of the device is to make cutting of polystyrene in several arbitrary planes.

The biggest advantage of our machine is the clean formatting of polystyrene, during which there is no waste in the form of polystyrene balls, which are so difficult to clean.

Thanks to the aluminum stop attached at a 90-degree angle to the cutting line, as well as the two-sided tension of the cutting wire with two springs, the obtained cut is characterized by remarkable precision and accuracy.

The device is started by switch equipped with a diode. A lit diode led informs the user that the machine has been started. The machine is powered from the wall socket, to which the device is connected with a long (190 cm) cable, making the machine more mobile.

An additional advantage is the installed thermo-bimetallic fuse, which aims to eliminate the risk of electric shock to the person operating the machine, as well as to protect the device from overheating.

The machine has been equipped with four 30 mm high legs, which enables stable positioning of the device on any surface. You get 2 additional cutting wires included with each purchased machine. Non-ferrous chromium nickel, nichrome: Ni 80%, Cr 20%

Each machine is sent professionally packed in a specially manufactured cardboard packaging, ideally suited to its dimensions. We do not ship this machine outside Poland!

The machine has the following workspace parameters:

  • maximum cutting length: 113 cm
  • maximum cutting thickness: 60 cm
  • power supply: 250W 230/24V 8A
  • wire: 0.7 mm
Wybierz walutę
PLN Polish złoty
EUR Euro